Setup day part 2

Joey Hess joey@kitenet.net
Mon, 1 Mar 1999 14:20:41 -0800


Yes we do.

David Bristel wrote:
> Unfortunately, I can't make it down, a few things caught up with me today that I
> had to take care of.  I WILL be down there at 9am or so on Tuesday-Thursday
> though.  Do we still need a hub for the show?
> 
> 							Dave
> 
> 
> On Mon, 1 Mar 1999, Michael Schmitz wrote:
> 
> > Date: Mon, 01 Mar 1999 14:11:35 -0800
> > From: Michael Schmitz <mschmitz@lbl.gov>
> > To: Joey Hess <joey@kitenet.net>
> > Cc: Bay Area Debian <bad@kitenet.net>,
> >     ". Sudhakar Chandrasekharan" <thaths@netscape.com>,
> >     Sylvester Baker Smith II <sly@CSUA.Berkeley.EDU>,
> >     David Welton <davidw@master.debian.org>,
> >     epsasnova <epsas@sky.bluelight.net>,
> >     Donovan Freemyer <dlfg@tsoft.com>,
> >     Nils Lohner <lohner@typhoon.icd.teradyne.com>, alan@webwidgets.net,
> >     "G. Crimp" <ye416@vifa1.freenet.victoria.bc.ca>,
> >     Kevin Smathers <kevin@ank.com>, Klaus Kettner <kk@sesom.de>,
> >     Blackwolf <blackwlf@blackwolf.com>, Darren Benham <gecko@debian.org>,
> >     Kevin Dalley <kevind@rahul.net>, Nathan Myers <ncm@best.com>,
> >     David Bristel <targon@targonia.com>,
> >     Seth <schoen@uclink4.berkeley.edu>,
> >     Joseph Carter <knghtbrd@debian.org>,
> >     Rafael Kitover <rkitover@dillinger.io.com>,
> >     wakkerman@cs.leidenuniv.nl
> > Subject: Setup day part 2
> > 
> > Hi,
> > 
> > Joey Hess wrote:
> > > A few people will be in at the booth at various times tomorrow to work on a
> > > few remaining details, but on the whole, the second setup day (had been on
> > > monday) is **CANCELED**.
> > 
> > I'm not going to make it to the setup today; a couple of final boot-floppies
> > fixes and a seminar this afternoon are to blame for this. 
> > 
> > If I can get on the expo floor tomorrow before 10 am, and if we're
> > guaranteed to
> > have power before 10 am, I can finish the setup at that time. Added
> > benefit: I can try to pull a mirror of 2.1 to a Syjet disk. 
> > 
> > If anyone wants to go ahead with the SLIP setup: the dark grey modem cable
> > (split 9/25 pin female to 25 pin male) attached to the RS422/232
> > converter box
> > on the floor should be the right setup. And the other cables (a nullmodem
> > between a Mac and PC modem cables) should get the Mac going. /etc/init.d/network
> > on the Atari has the necessary setup for Mac and Atari and can be copied over
> > to the Mac. 
> > 
> > Power strip and tape to mark the equipment coming tomorrow.
> > 
> > 	Michael
> > 

-- 
see shy jo